Herramientas de creación de bocetos
Tras seleccionar el plano, se activarán todas las herramientas de creación de bocetos. Estas herramientas se describen a continuación.
Punto (Point)
La herramienta Punto crea un punto en el boceto actual que permite construir elementos geométricos. El procedimiento para usar esta herramienta se describe a continuación.
Haga clic en la herramienta Crear punto de la Barra de herramientas del entorno de trabajo de Sketcher; consulte la Figura 5. Se le pedirá que especifique la ubicación del punto.
Haga clic en las ubicaciones deseadas en el área de vista 3D. Se crearán los puntos; consulte la Figura 6.
Presione la tecla ESC del teclado o presione Botón Derecho del Ratón (RMB) para salir de la herramienta.
Polilínea (Polyline)
La herramienta Crear polilínea se utiliza para crear líneas continuas y segmentos de arco conectados por sus vértices. La herramienta polilínea tiene varios modos que se pueden alternar con la tecla M.
Por ejemplo, puedes dibujar arcos tangentes o perpendiculares siguiendo una línea o un segmento de arco. El procedimiento para usar esta herramienta se describe a continuación.
Haga clic en la herramienta Crear polilínea de la Barra de herramientas del entorno de trabajo de Sketcher; consulte la Figura 7. Se le pedirá que cree un segmento de línea.
Haga clic en la vista 3D y cree un segmento de línea. Pulse la tecla M para alternar entre los diferentes modos de creación de polilíneas; consulte la Figura 8.
Después de crear un segmento de línea, presione la tecla M una vez para crear una línea perpendicular a la entidad anterior.
Presione la tecla M dos veces para crear una línea tangente a la entidad anterior.
Presione la tecla M tres veces para crear un arco tangencial a la entidad anterior.
Presione la tecla M cuatro veces para crear un arco perpendicular a la izquierda de la entidad anterior.
Presione la tecla M cinco veces para crear un arco perpendicular a la derecha de la entidad anterior.
Presione la tecla M seis veces para crear una línea coincidente con la entidad anterior como en el estado normal.
Presione la tecla ESC o presione Botón Derecho del Ratón (RMB) para salir de la creación y continuar creando una nueva línea.
Presione la tecla ESC o presione RMB nuevamente para salir de la herramienta.
Línea (Line)
La herramienta Línea se utiliza para crear una línea seleccionando dos puntos en la vista 3D. El procedimiento para usar esta herramienta se describe a continuación.
Haga clic en la herramienta Crear línea de la Barra de herramientas del banco de trabajo de Sketcher (consulte la Figura 9). Se mostrará el cuadro de diálogo de línea (consulte la Figura 10). También puede pulsar la tecla GL para seleccionar la herramienta Línea. Se le pedirá que especifique el punto de inicio de la línea.
Seleccione la opción Punto, Longitud, Ángulo en el menú desplegable Modo para crear una línea. Se le pedirá que especifique el punto de inicio de la línea.
Haga clic en la ubicación deseada para especificar el punto de inicio y mueva el cursor en la dirección deseada para crear la línea. Se le pedirá que especifique el punto final o la longitud y el ángulo de la línea.
Haga clic en la ubicación deseada para especificar el punto final de la línea o introduzca la longitud y el ángulo deseados en los cuadros de edición correspondientes en la vista 3D. Tenga en cuenta que puede cambiar entre los cuadros de edición con la tecla Tab del teclado.
Después de especificar los parámetros deseados, presione la tecla Intro. Se creará la línea; consulte la Figura 11.
De manera similar, puedes crear líneas utilizando las opciones Punto, ancho, alto y 2 puntos.
Si desea crear una línea para fines de construcción, seleccione la línea que ha creado y haga clic RMB en un área vacía de la vista 3D; se mostrará un menú de acceso directo.
Haga clic en la opción Activar geometría de construcción del menú contextual; la línea normal se convertirá en una línea de construcción y viceversa (consulte la Figura 12). Tenga en cuenta que la geometría de construcción se muestra en azul.
Presione la tecla ESC o presione RMB para salir de la herramienta.
Arco (Arc)
Las herramientas disponibles en el menú desplegable Crear arco de la Barra de herramientas del entorno de trabajo Sketcher se utilizan para crear un arco con tres puntos. Hay cinco herramientas en el menú desplegable Crear arco: Centrar arco por centro, Crear arco por 3 puntos, Crear arco de elipse, Crear arco de hipérbola y Crear arco de parábola; consulte la Figura 13. A continuación, se describen los procedimientos para usar estas herramientas.
Crear arco por el centro (Create arc by center)
La herramienta Crear arco por centro se utiliza para crear un arco a partir de su centro y sus extremos. El procedimiento para usar esta herramienta se describe a continuación.
Haga clic en la herramienta Crear arco por centro del menú desplegable Crear arco o presione GA desde el teclado. Se mostrará el cuadro de diálogo Parámetros de arco con la opción Centro seleccionada en el menú desplegable Modo; consulte la Figura 14 y se le pedirá que especifique el punto central del arco.
Haga clic en la ubicación deseada para especificar el punto central del arco.
Mueva el cursor en la dirección deseada y haga clic para especificar el punto inicial del arco. También puede especificar el valor del radio deseado en el cuadro de edición y luego hacer clic para definir el punto inicial. Se le pedirá que especifique el punto final o el ángulo de apertura del arco.
Aleje el cursor y haga clic en la ubicación deseada para especificar el punto final del arco. También puede especificar el ángulo de apertura deseado en el cuadro de edición y luego hacer clic para definir el punto final del arco. Se creará el arco; consulte la Figura 15.
De manera similar, puede crear un arco utilizando la opción 3 puntos de borde del menú desplegable Modo; consulte la Figura 16
Presione la tecla ESC o presione RMB para salir de la herramienta.
Crear arco de 3 puntos (Create arc by 3 points)
La herramienta Crear arco por centro se utiliza para crear un arco a partir de sus extremos y un punto a lo largo del arco. El procedimiento para usar esta herramienta es el mismo que el descrito en la herramienta anterior; consulte la Figura 17.
Create arc of ellipse
The Create arc of ellipse tool is used to create an arc of ellipse using four points (the center, the end of major radius, the start point, and the end point). The procedure to use this tool is discussed next.
Click on the Create arc of ellipse tool from the Create arc drop-down or press GE from keyboard. You will be asked to specify center point of the are.
Click in the 3D view area to specify center point on the arc; refer to Figure-18. You will be asked to specify major radius of ellipse.
Move to cursor away from the center point and click to specify major radius of the arc. You will be asked to specify starting point of arc.
Click on desired location to specify starting point of arc and then the end point of arc. The arc of hyperbola will be created.
Press ESC key or press RMB to exit the tool.
Create arc of hyperbola
The Create arc of hyperbola tool is used to create an arc of hyperbola using four points (the center point, the major radius of arc, the start point, and the end point of arc). The procedure to use this tool is discussed next.
Click on the Create arc of hyperbola tool from the Create arc drop-down or press GH from keyboard. You will be asked to specify center point of arc.
Click in the 3D view area to specify center point of arc; refer to Figure-19. You will be asked to specify major radius of arc.
Move the cursor away from the center point and click to specify major radius of the arc. You will be asked to specify starting point of arc.
Click on desired location to specify starting point of arc and then the end point of arc. The arc of hyperbola will be created.
Press ESC key or press RMB to exit the tool.
Create arc of parabola
The Create arc of parabola tool is used to create an arc of parabola using four points (the focus of arc, the vertex of arc, the start point, and the end point of arc). The procedure to use this tool is discussed next.
Click on the Create arc of parabola tool from the Create arc drop-down or press GP from keyboard. You will be asked to specify focus of the arc.
Click in the 3D view area to specify focus point of arc; refer to Figure-20.
Move the cursor away and click to specify vertex of the arc.
Click at desired location to specify starting point of arc and then the end point of arc. The arc of parabola will be created.
Press ESC key or press RMB to exit the tool.
Circle/Ellipse
The tools available in Create circle/ellipse drop-down from Toolbar in the Sketcher workbench are used to create circle and ellipse using two and three points. There are four tools in Create circle/ellipse drop-down; Create circle by center, Create circle by 3 points, Create ellipse by center, and Create ellipse by 3 points; refer to Figure-21. The procedure to use thse tools are discussed next.
Create circle by center
The Create circle by center tool is used to create a circle by its center and a point along the circle. The procedure to use this tool is discussed next.
Click on the Create circle by center tool from Create circle/ellipse drop-down or press GC from the keyboard. The Circle parameters dialog box will be displayed with the Center option selected in the Mode drop-down; refer to Figure-22. Also, you will be asked to specify the center point of the circle.
Click in the 3D view area at desired location to specify center point of the circle. You will be asked to specify diameter of the circle.
Move the cursor away and click at desired location to specify the diameter of circle or you can specify desired diameter value in the edit box displayed and then press ENTER to define the diameter of circle. The circle will be created; refer to Figure-23.
Press ESC key or press RMB to exit the tool.
Create circle by 3 points
The Create circle by 3 points tool is used to create a circle by three points along the circle; refer to Figure-24.
Create ellipse by center
The Create ellipse by centar tool is used to create an ellipse by its center, the end of major radius, and the minor radius. The procedure to use this tool is discussed next.
Click on the Create ellipse by center tool from Create circle/ellipse drop-down. The Ellipse parameters dialog box will be displayed with the Center option selected in the Mode drop-down; refer to Figure-25. And you will be asked to specify the center point of the ellipse.
Click in the 3D view area at desired location to specify center point of the ellipse. You will be asked to specify the major radius of ellipse.
Move the cursor away and click at desired location to specify the major radius of ellipse or you can also specify desired radius value in the edit box displayed and then click to define the major radius of ellipse. You will be asked to specify minor radius of ellipse.
Move the cursor away and click at desired location to specify the minor radius of ellipse or enter desired value in the edit box displayed to specify the minor radius. The ellipse will be created; refer to Figure-26.
Create ellipse by 3 points
The Create ellipse by 3 points tool is used to create an ellipse by the endpoints of one of its axes and a point along the ellipse. The procedure to use this tool is same as discussed in Create circle by 3 points tool.
Rectangle
There are three tools available in Create rectangle drop-down of Toolbar in the Sketcher workbench to create rectangles; Rectangle, Centered rectangle, and Rounded rectangle; refer to Figure-27. The procedures to use these tools are discussed next.
Rectangle
The Rectanglr tool is used to create a rectangle by using two opposite points. The procedure to use this tool is given next.
Click on Rectangle tool from Create rectangle drop-down. The Rectangle parameters dialog box will be displayed with Corner, width, and height option selected in the Mode drop-down to create a rectangle; refer to Figure-28. Also, you will be asked to specify first corner point of the rectangle.
Click in the 3D view area at desired location to specify first corner point of the rectangle. You will be asked to specify second corner point of the rectangle.
Move the cursor away and click at desired location to specify second corner point of the rectangle or you can also enter desired values in the edit boxes displayed to define the width and height of rectangle. The rectangle will be created; refer to Figure-29.
Press ESC key or press RMB to exit the tool.
Centered rectangle
The Centered rectangle tool is used to create a rectangle by using center point and a corner point. Click on Centered rectangle tool from Create rectangle drop-down. The Rectangle parameters dialog box will be displayed as discussed earlier with the Center, width, height option selected in the Mode drop-down. The procedure to use this tool is same as discussed in previous tool; refer to Figure-30.
Press ESC key or press RMB to exit the tool.
Rounded rectangle
The Rounded rectangle tool is used